Pour Lots
Every co-polymer batch that came off a tool, and every lot machined or assembled out of one. A finished mount carries the lot it was assembled under, that lot names the sub-assembly lot it came from, and that names the pour — so the trace runs from a mount on a boat back to the day the polymer was poured.
Lots on file
737
poured, machined and assembled
Released
149
in the most recent 150 shown here
Quarantined
1
held pending a re-test
From the mould shop
13
pour lots in this view
On QA hold
Out of the sellable pool until someone releases them.
| Lot | Part number | Qty | Durometer | Made | Why | |
|---|---|---|---|---|---|---|
| PL-26-2215 | MLD-V040-45 | 14 | 45 Shore A | 03 Aug 2026 | Durometer read 4 points under on the third check. Held pending a re-test with the mould shop. |
150 shown
| Lot | Part number | Source | Status | Qty | Durometer | Made | Where | From | |
|---|---|---|---|---|---|---|---|---|---|
| PL-26-2810 IF-CoC-2810 | CKD-V090-HNGM16-60-ZP Isoflex Hanger mount — 90 mm, M16, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 12 | 60 | 07 Aug 2026 | Coomera Works | — | |
| PL-26-2700 IF-CoC-2700 | IFV127-WHSM16-60-SS Isoflex Superstructure & wheelhouse mount — 127 mm, M16, 60 Shore A, 316 stainless | Assembled | Released | 5 | 60 | 07 Aug 2026 | Coomera Works | — | |
| PL-26-2601 IF-CoC-2601 | IFV075-GPMM16-55-SS Isoflex General purpose mount — 75 mm, M16, 55 Shore A, 316 stainless | Assembled | Released | 13 | 55 | 07 Aug 2026 | Coomera Works | PL-26-2288 | |
| PL-26-2548 IF-CoC-2548 | IFV178-TRNM24-45-ZP Isoflex Trunnion mount — 178 mm, M24, 45 Shore A, zinc plated | Assembled | Released | 19 | 45 | 07 Aug 2026 | Coomera Works | — | |
| PL-26-2546 IF-CoC-2546 | IFV152-TRNM30-45-ZP Isoflex Trunnion mount — 152 mm, M30, 45 Shore A, zinc plated | Assembled | Released | 20 | 45 | 07 Aug 2026 | Coomera Works | PL-26-2267 | |
| PL-26-2543 IF-CoC-2543 | IFV152-TRNM24-70-ZP Isoflex Trunnion mount — 152 mm, M24, 70 Shore A, zinc plated | Assembled | Released | 25 | 70 | 07 Aug 2026 | Coomera Works | — | |
| PL-26-2348 IF-CoC-2348 | IFV090-ASTM30-70-ZP Isoflex S Type adjusting stud mount — 90 mm, M30, 70 Shore A, zinc plated | Assembled | Released | 10 | 70 | 07 Aug 2026 | Coomera Works | — | |
| PL-26-2305 IF-CoC-2305 | SA-V075-WHS-60 Superstructure & wheelhouse sub-assembly — 75 mm, 60 Shore A | Machined | Released | 26 | 60 | 07 Aug 2026 | Coomera Works | PL-26-2130 | |
| PL-26-2269 IF-CoC-2269 | SA-V152-TRN-75 Trunnion sub-assembly — 152 mm, 75 Shore A | Machined | Released | 59 | 75 | 07 Aug 2026 | Coomera Works | — | |
| PL-26-2805 IF-CoC-2805 | CKD-V090-CYLM20-60-ZP Isoflex Cylindrical mount — 90 mm, M20, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 27 | 60 | 06 Aug 2026 | Coomera Works | PL-26-2262 | |
| PL-26-2801 IF-CoC-2801 | CKD-V152-DCPM30-65-ZP Isoflex Dual compression mount — 152 mm, M30, 65 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 28 | 65 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2791 IF-CoC-2791 | CKD-V110-DCPM24-60-ZP Isoflex Dual compression mount — 110 mm, M24, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 24 | 60 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2676 IF-CoC-2676 | IFV075-WHSM16-45-SS Isoflex Superstructure & wheelhouse mount — 75 mm, M16, 45 Shore A, 316 stainless | Assembled | Released | 17 | 45 | 06 Aug 2026 | Coomera Works | PL-26-2304 | |
| PL-26-2621 IF-CoC-2621 | IFV090-GPMM20-60-SS Isoflex General purpose mount — 90 mm, M20, 60 Shore A, 316 stainless | Assembled | Released | 19 | 60 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2580 IF-CoC-2580 | IFV075-HNGM16-55-ZP Isoflex Hanger mount — 75 mm, M16, 55 Shore A, zinc plated | Assembled | Released | 42 | 55 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2579 IF-CoC-2579 | IFV075-HNGM16-45-SS Isoflex Hanger mount — 75 mm, M16, 45 Shore A, 316 stainless | Assembled | Released | 15 | 45 | 06 Aug 2026 | Coomera Works | PL-26-2279 | |
| PL-26-2388 IF-CoC-2388 | IFV152-ASTM24-75-ZP Isoflex S Type adjusting stud mount — 152 mm, M24, 75 Shore A, zinc plated | Assembled | Released | 25 | 75 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2260 IF-CoC-2260 | SA-V075-CYL-65 Cylindrical sub-assembly — 75 mm, 65 Shore A | Machined | Released | 54 | 65 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2239 IF-CoC-2239 | SA-V152-BDN-70 B Type bolt-down sub-assembly — 152 mm, 70 Shore A | Machined | Released | 52 | 70 | 06 Aug 2026 | Coomera Works | — | |
| PL-26-2817 IF-CoC-2817 | CKD-V110-GPMM20-65-ZP Isoflex General purpose mount — 110 mm, M20, 65 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 26 | 65 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2811 IF-CoC-2811 | CKD-V090-HNGM16-65-ZP Isoflex Hanger mount — 90 mm, M16, 65 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 2 | 65 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2718 IF-CoC-2718 | IFC06-165-D55-70 Isoflex 6 Bolt gearbox coupling — 165 mm PCD, 55 mm bore, 70 Shore A | Assembled | Released | 12 | 70 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2715 IF-CoC-2715 | IFC06-152-D50-70 Isoflex 6 Bolt gearbox coupling — 152 mm PCD, 50 mm bore, 70 Shore A | Assembled | Released | 22 | 70 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2600 IF-CoC-2600 | IFV063-GPMM20-75-ZP Isoflex General purpose mount — 63 mm, M20, 75 Shore A, zinc plated | Assembled | Released | 30 | 75 | 05 Aug 2026 | Coomera Works | PL-26-2287 | |
| PL-26-2586 IF-CoC-2586 | IFV075-HNGM20-75-SS Isoflex Hanger mount — 75 mm, M20, 75 Shore A, 316 stainless | Assembled | Released | 4 | 75 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2578 IF-CoC-2578 | IFV063-HNGM20-75-ZP Isoflex Hanger mount — 63 mm, M20, 75 Shore A, zinc plated | Assembled | Released | 16 | 75 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2480 IF-CoC-2480 | IFV203-BDNM20-50-SS Isoflex B Type bolt-down mount — 203 mm, M20, 50 Shore A, 316 stainless | Assembled | Released | 15 | 50 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2457 IF-CoC-2457 | IFV152-BDNM20-55-ZP Isoflex B Type bolt-down mount — 152 mm, M20, 55 Shore A, zinc plated | Assembled | Released | 13 | 55 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2434 IF-CoC-2434 | IFV090-BDNM24-70-SS Isoflex B Type bolt-down mount — 90 mm, M24, 70 Shore A, 316 stainless | Assembled | Released | 13 | 70 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2397 IF-CoC-2397 | IFV178-ASTM24-55-ZP Isoflex S Type adjusting stud mount — 178 mm, M24, 55 Shore A, zinc plated | Assembled | Released | 18 | 55 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2383 IF-CoC-2383 | IFV152-ASTM20-50-ZP Isoflex S Type adjusting stud mount — 152 mm, M20, 50 Shore A, zinc plated | Assembled | Released | 14 | 50 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2379 IF-CoC-2379 | IFV152-ASTM16-60-SS Isoflex S Type adjusting stud mount — 152 mm, M16, 60 Shore A, 316 stainless | Assembled | Released | 6 | 60 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2338 IF-CoC-2338 | IFV075-ASTM30-65-ZP Isoflex S Type adjusting stud mount — 75 mm, M30, 65 Shore A, zinc plated | Assembled | Released | 33 | 65 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2302 IF-CoC-2302 | SA-V075-LMM-65 Light machinery sub-assembly — 75 mm, 65 Shore A | Machined | Released | 48 | 65 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2250 IF-CoC-2250 | SA-V127-DCP-65 Dual compression sub-assembly — 127 mm, 65 Shore A | Machined | Released | 19 | 65 | 05 Aug 2026 | Coomera Works | PL-26-2156 | |
| PL-26-2232 IF-CoC-2232 | SA-V090-BDN-50 B Type bolt-down sub-assembly — 90 mm, 50 Shore A | Machined | Released | 47 | 50 | 05 Aug 2026 | Coomera Works | PL-26-2136 | |
| PL-26-2155 IF-CoC-2155 | MLD-V127-60 Isoflex co-polymer moulding — 127 mm body, 60 Shore A | Poured | Released | 20 | 60 | 05 Aug 2026 | Coomera Works | — | |
| PL-26-2739 IF-CoC-2739 | IFCSP-114-D40-80 Isoflex Spicer / Uni-Joint gearbox coupling — 114 mm PCD, 40 mm bore, 80 Shore A | Assembled | Released | 6 | 80 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2722 IF-CoC-2722 | IFC06-180-D55-60 Isoflex 6 Bolt gearbox coupling — 180 mm PCD, 55 mm bore, 60 Shore A | Assembled | Released | 26 | 60 | 04 Aug 2026 | Coomera Works | PL-26-2318 | |
| PL-26-2690 IF-CoC-2690 | IFV090-WHSM20-70-ZP Isoflex Superstructure & wheelhouse mount — 90 mm, M20, 70 Shore A, zinc plated | Assembled | Released | 33 | 70 | 04 Aug 2026 | Coomera Works | PL-26-2309 | |
| PL-26-2654 IF-CoC-2654 | IFV050-LMMM16-45-ZP Isoflex Light machinery mount — 50 mm, M16, 45 Shore A, zinc plated | Assembled | Released | 16 | 45 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2647 IF-CoC-2647 | IFV040-LMMM16-45-SS Isoflex Light machinery mount — 40 mm, M16, 45 Shore A, 316 stainless | Assembled | Released | 9 | 45 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2615 IF-CoC-2615 | IFV075-GPMM24-70-SS Isoflex General purpose mount — 75 mm, M24, 70 Shore A, 316 stainless | Assembled | Released | 18 | 70 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2540 IF-CoC-2540 | IFV110-CYLM20-55-ZP Isoflex Cylindrical mount — 110 mm, M20, 55 Shore A, zinc plated | Assembled | Released | 13 | 55 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2530 IF-CoC-2530 | IFV075-CYLM20-45-ZP Isoflex Cylindrical mount — 75 mm, M20, 45 Shore A, zinc plated | Assembled | Released | 38 | 45 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2521 IF-CoC-2521 | IFV050-CYLM20-70-ZP Isoflex Cylindrical mount — 50 mm, M20, 70 Shore A, zinc plated | Assembled | Released | 38 | 70 | 04 Aug 2026 | Coomera Works | PL-26-2257 | |
| PL-26-2498 IF-CoC-2498 | IFV152-DCPM20-45-SS Isoflex Dual compression mount — 152 mm, M20, 45 Shore A, 316 stainless | Assembled | Released | 3 | 45 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2428 IF-CoC-2428 | IFV090-BDNM24-45-ZP Isoflex B Type bolt-down mount — 90 mm, M24, 45 Shore A, zinc plated | Assembled | Released | 31 | 45 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2323 IF-CoC-2323 | SA-C10-280-70 10 Bolt coupling element — 280 mm PCD, 70 Shore A | Machined | Released | 17 | 70 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2307 IF-CoC-2307 | SA-V075-WHS-70 Superstructure & wheelhouse sub-assembly — 75 mm, 70 Shore A | Machined | Released | 49 | 70 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2303 IF-CoC-2303 | SA-V075-LMM-70 Light machinery sub-assembly — 75 mm, 70 Shore A | Machined | Released | 29 | 70 | 04 Aug 2026 | Coomera Works | — | |
| PL-26-2267 IF-CoC-2267 | SA-V152-TRN-45 Trunnion sub-assembly — 152 mm, 45 Shore A | Machined | Released | 21 | 45 | 04 Aug 2026 | Coomera Works | PL-26-2159 | |
| PL-26-2245 IF-CoC-2245 | SA-V203-BDN-70 B Type bolt-down sub-assembly — 203 mm, 70 Shore A | Machined | Released | 16 | 70 | 04 Aug 2026 | Coomera Works | PL-26-2178 | |
| PL-26-2237 IF-CoC-2237 | SA-V152-BDN-45 B Type bolt-down sub-assembly — 152 mm, 45 Shore A | Machined | Released | 28 | 45 | 04 Aug 2026 | Coomera Works | PL-26-2159 | |
| PL-26-2836 IF-CoC-2836 | CKD-V110-WHSM20-60-ZP Isoflex Superstructure & wheelhouse mount — 110 mm, M20, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 9 | 60 | 03 Aug 2026 | Coomera Works | — | |
| PL-26-2824 IF-CoC-2824 | CKD-V127-GPMM24-55-ZP Isoflex General purpose mount — 127 mm, M24, 55 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 10 | 55 | 03 Aug 2026 | Coomera Works | — | |
| PL-26-2711 IF-CoC-2711 | IFC04-152-D45-70 Isoflex 4 Bolt gearbox coupling — 152 mm PCD, 45 mm bore, 70 Shore A | Assembled | Released | 19 | 70 | 03 Aug 2026 | Coomera Works | — | |
| PL-26-2688 IF-CoC-2688 | IFV090-WHSM20-50-SS Isoflex Superstructure & wheelhouse mount — 90 mm, M20, 50 Shore A, 316 stainless | Assembled | Released | 15 | 50 | 03 Aug 2026 | Coomera Works | — | |
| PL-26-2665 IF-CoC-2665 | IFV063-LMMM16-50-SS Isoflex Light machinery mount — 63 mm, M16, 50 Shore A, 316 stainless | Assembled | Released | 13 | 50 | 03 Aug 2026 | Coomera Works | — | |
| PL-26-2450 IF-CoC-2450 | IFV152-BDNM16-45-ZP Isoflex B Type bolt-down mount — 152 mm, M16, 45 Shore A, zinc plated | Assembled | Released | 34 | 45 | 03 Aug 2026 | Coomera Works | PL-26-2237 | |
| PL-26-2215 | MLD-V040-45 Isoflex co-polymer moulding — 40 mm body, 45 Shore A | Poured | Quarantine | 14 | 45 | 03 Aug 2026 | QA hold | — | |
| PL-26-2774 IF-CoC-2774 | CKD-V110-BDNM24-65-ZP Isoflex B Type bolt-down mount — 110 mm, M24, 65 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 17 | 65 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2610 IF-CoC-2610 | IFV075-GPMM24-50-ZP Isoflex General purpose mount — 75 mm, M24, 50 Shore A, zinc plated | Assembled | Released | 27 | 50 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2474 IF-CoC-2474 | IFV178-BDNM24-50-SS Isoflex B Type bolt-down mount — 178 mm, M24, 50 Shore A, 316 stainless | Assembled | Released | 13 | 50 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2385 IF-CoC-2385 | IFV152-ASTM20-60-SS Isoflex S Type adjusting stud mount — 152 mm, M20, 60 Shore A, 316 stainless | Assembled | Released | 8 | 60 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2364 IF-CoC-2364 | IFV127-ASTM16-45-ZP Isoflex S Type adjusting stud mount — 127 mm, M16, 45 Shore A, zinc plated | Assembled | Released | 29 | 45 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2328 IF-CoC-2328 | SA-CSP-152-70 Spicer / Uni-Joint coupling element — 152 mm PCD, 70 Shore A | Machined | Released | 38 | 70 | 02 Aug 2026 | Coomera Works | PL-26-2197 | |
| PL-26-2321 IF-CoC-2321 | SA-C08-280-60 8 Bolt coupling element — 280 mm PCD, 60 Shore A | Machined | Released | 13 | 60 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2291 IF-CoC-2291 | SA-V090-GPM-75 General purpose sub-assembly — 90 mm, 75 Shore A | Machined | Released | 44 | 75 | 02 Aug 2026 | Coomera Works | — | |
| PL-26-2819 IF-CoC-2819 | CKD-V110-GPMM24-55-ZP Isoflex General purpose mount — 110 mm, M24, 55 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 24 | 55 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2790 IF-CoC-2790 | CKD-V110-DCPM24-55-ZP Isoflex Dual compression mount — 110 mm, M24, 55 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 14 | 55 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2683 IF-CoC-2683 | IFV090-WHSM16-60-ZP Isoflex Superstructure & wheelhouse mount — 90 mm, M16, 60 Shore A, zinc plated | Assembled | Released | 47 | 60 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2681 IF-CoC-2681 | IFV075-WHSM20-75-SS Isoflex Superstructure & wheelhouse mount — 75 mm, M20, 75 Shore A, 316 stainless | Assembled | Released | 14 | 75 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2506 IF-CoC-2506 | IFV178-DCPM24-45-SS Isoflex Dual compression mount — 178 mm, M24, 45 Shore A, 316 stainless | Assembled | Released | 13 | 45 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2475 IF-CoC-2475 | IFV178-BDNM24-55-ZP Isoflex B Type bolt-down mount — 178 mm, M24, 55 Shore A, zinc plated | Assembled | Released | 8 | 55 | 01 Aug 2026 | Coomera Works | PL-26-2241 | |
| PL-26-2451 IF-CoC-2451 | IFV152-BDNM16-45-SS Isoflex B Type bolt-down mount — 152 mm, M16, 45 Shore A, 316 stainless | Assembled | Released | 14 | 45 | 01 Aug 2026 | Coomera Works | PL-26-2237 | |
| PL-26-2447 IF-CoC-2447 | IFV127-BDNM20-70-ZP Isoflex B Type bolt-down mount — 127 mm, M20, 70 Shore A, zinc plated | Assembled | Released | 42 | 70 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2436 IF-CoC-2436 | IFV110-BDNM16-70-ZP Isoflex B Type bolt-down mount — 110 mm, M16, 70 Shore A, zinc plated | Assembled | Released | 10 | 70 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2409 IF-CoC-2409 | IFV254-ASTM24-45-ZP Isoflex S Type adjusting stud mount — 254 mm, M24, 45 Shore A, zinc plated | Assembled | Released | 12 | 45 | 01 Aug 2026 | Coomera Works | PL-26-2226 | |
| PL-26-2322 IF-CoC-2322 | SA-C08-280-70 8 Bolt coupling element — 280 mm PCD, 70 Shore A | Machined | Released | 17 | 70 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2306 IF-CoC-2306 | SA-V075-WHS-65 Superstructure & wheelhouse sub-assembly — 75 mm, 65 Shore A | Machined | Released | 53 | 65 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2301 IF-CoC-2301 | SA-V075-LMM-45 Light machinery sub-assembly — 75 mm, 45 Shore A | Machined | Released | 40 | 45 | 01 Aug 2026 | Coomera Works | PL-26-2124 | |
| PL-26-2289 IF-CoC-2289 | SA-V075-GPM-75 General purpose sub-assembly — 75 mm, 75 Shore A | Machined | Released | 52 | 75 | 01 Aug 2026 | Coomera Works | PL-26-2132 | |
| PL-26-2282 IF-CoC-2282 | SA-V090-HNG-55 Hanger sub-assembly — 90 mm, 55 Shore A | Machined | Released | 43 | 55 | 01 Aug 2026 | Coomera Works | PL-26-2138 | |
| PL-26-2111 IF-CoC-2111 | MLD-V050-65 Isoflex co-polymer moulding — 50 mm body, 65 Shore A | Poured | Released | 33 | 65 | 01 Aug 2026 | Coomera Works | — | |
| PL-26-2803 IF-CoC-2803 | CKD-V090-CYLM16-65-ZP Isoflex Cylindrical mount — 90 mm, M16, 65 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 7 | 65 | 31 July 2026 | Coomera Works | — | |
| PL-26-2795 IF-CoC-2795 | CKD-V127-DCPM20-60-ZP Isoflex Dual compression mount — 127 mm, M20, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 2 | 60 | 31 July 2026 | Coomera Works | — | |
| PL-26-2755 IF-CoC-2755 | CKD-V110-ASTM24-55-ZP Isoflex S Type adjusting stud mount — 110 mm, M24, 55 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 9 | 55 | 31 July 2026 | Coomera Works | — | |
| PL-26-2642 IF-CoC-2642 | IFV152-GPMM20-65-ZP Isoflex General purpose mount — 152 mm, M20, 65 Shore A, zinc plated | Assembled | Released | 7 | 65 | 31 July 2026 | Coomera Works | PL-26-2297 | |
| PL-26-2556 IF-CoC-2556 | IFV203-TRNM24-45-ZP Isoflex Trunnion mount — 203 mm, M24, 45 Shore A, zinc plated | Assembled | Released | 5 | 45 | 31 July 2026 | Coomera Works | — | |
| PL-26-2513 IF-CoC-2513 | IFV203-DCPM20-70-ZP Isoflex Dual compression mount — 203 mm, M20, 70 Shore A, zinc plated | Assembled | Released | 6 | 70 | 31 July 2026 | Coomera Works | — | |
| PL-26-2482 IF-CoC-2482 | IFV203-BDNM24-70-SS Isoflex B Type bolt-down mount — 203 mm, M24, 70 Shore A, 316 stainless | Assembled | Released | 9 | 70 | 31 July 2026 | Coomera Works | PL-26-2245 | |
| PL-26-2445 IF-CoC-2445 | IFV127-BDNM20-60-ZP Isoflex B Type bolt-down mount — 127 mm, M20, 60 Shore A, zinc plated | Assembled | Released | 7 | 60 | 31 July 2026 | Coomera Works | — | |
| PL-26-2271 IF-CoC-2271 | SA-V254-TRN-50 Trunnion sub-assembly — 254 mm, 50 Shore A | Machined | Released | 16 | 50 | 31 July 2026 | Coomera Works | PL-26-2182 | |
| PL-26-2270 IF-CoC-2270 | SA-V178-TRN-55 Trunnion sub-assembly — 178 mm, 55 Shore A | Machined | Released | 25 | 55 | 31 July 2026 | Coomera Works | PL-26-2165 | |
| PL-26-2225 IF-CoC-2225 | SA-V203-AST-60 S Type adjusting stud sub-assembly — 203 mm, 60 Shore A | Machined | Released | 11 | 60 | 31 July 2026 | Coomera Works | PL-26-2176 | |
| PL-26-2224 IF-CoC-2224 | SA-V203-AST-45 S Type adjusting stud sub-assembly — 203 mm, 45 Shore A | Machined | Released | 25 | 45 | 31 July 2026 | Coomera Works | PL-26-2171 | |
| PL-26-2171 IF-CoC-2171 | MLD-V203-45 Isoflex co-polymer moulding — 203 mm body, 45 Shore A | Poured | Released | 25 | 45 | 31 July 2026 | Coomera Works | — | |
| PL-26-2170 IF-CoC-2170 | MLD-V178-75 Isoflex co-polymer moulding — 178 mm body, 75 Shore A | Poured | Released | 13 | 75 | 31 July 2026 | Coomera Works | — | |
| PL-26-2162 IF-CoC-2162 | MLD-V152-60 Isoflex co-polymer moulding — 152 mm body, 60 Shore A | Poured | Released | 16 | 60 | 31 July 2026 | Coomera Works | — | |
| PL-26-2106 IF-CoC-2106 | MLD-V040-70 Isoflex co-polymer moulding — 40 mm body, 70 Shore A | Poured | Released | 37 | 70 | 31 July 2026 | Coomera Works | — | |
| PL-26-2708 IF-CoC-2708 | IFC04-152-D30-80 Isoflex 4 Bolt gearbox coupling — 152 mm PCD, 30 mm bore, 80 Shore A | Assembled | Released | 7 | 80 | 30 July 2026 | Coomera Works | — | |
| PL-26-2537 IF-CoC-2537 | IFV110-CYLM16-55-ZP Isoflex Cylindrical mount — 110 mm, M16, 55 Shore A, zinc plated | Assembled | Released | 8 | 55 | 30 July 2026 | Coomera Works | — | |
| PL-26-2479 IF-CoC-2479 | IFV203-BDNM20-45-SS Isoflex B Type bolt-down mount — 203 mm, M20, 45 Shore A, 316 stainless | Assembled | Released | 5 | 45 | 30 July 2026 | Coomera Works | PL-26-2243 | |
| PL-26-2386 IF-CoC-2386 | IFV152-ASTM24-60-ZP Isoflex S Type adjusting stud mount — 152 mm, M24, 60 Shore A, zinc plated | Assembled | Released | 42 | 60 | 30 July 2026 | Coomera Works | — | |
| PL-26-2384 IF-CoC-2384 | IFV152-ASTM20-55-SS Isoflex S Type adjusting stud mount — 152 mm, M20, 55 Shore A, 316 stainless | Assembled | Released | 11 | 55 | 30 July 2026 | Coomera Works | — | |
| PL-26-2380 IF-CoC-2380 | IFV152-ASTM16-65-SS Isoflex S Type adjusting stud mount — 152 mm, M16, 65 Shore A, 316 stainless | Assembled | Released | 6 | 65 | 30 July 2026 | Coomera Works | — | |
| PL-26-2372 IF-CoC-2372 | IFV127-ASTM30-45-ZP Isoflex S Type adjusting stud mount — 127 mm, M30, 45 Shore A, zinc plated | Assembled | Released | 41 | 45 | 30 July 2026 | Coomera Works | — | |
| PL-26-2231 IF-CoC-2231 | SA-V075-BDN-60 B Type bolt-down sub-assembly — 75 mm, 60 Shore A | Machined | Released | 16 | 60 | 30 July 2026 | Coomera Works | PL-26-2130 | |
| PL-26-2147 IF-CoC-2147 | MLD-V110-70 Isoflex co-polymer moulding — 110 mm body, 70 Shore A | Poured | Released | 34 | 70 | 30 July 2026 | Coomera Works | — | |
| PL-26-2812 IF-CoC-2812 | CKD-V090-HNGM16-70-ZP Isoflex Hanger mount — 90 mm, M16, 70 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 16 | 70 | 29 July 2026 | Coomera Works | — | |
| PL-26-2792 IF-CoC-2792 | CKD-V110-DCPM30-60-ZP Isoflex Dual compression mount — 110 mm, M30, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 16 | 60 | 29 July 2026 | Coomera Works | — | |
| PL-26-2789 IF-CoC-2789 | CKD-V178-BDNM20-60-ZP Isoflex B Type bolt-down mount — 178 mm, M20, 60 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 31 | 60 | 29 July 2026 | Coomera Works | PL-26-2242 | |
| PL-26-2740 IF-CoC-2740 | IFCSP-114-D45-70 Isoflex Spicer / Uni-Joint gearbox coupling — 114 mm PCD, 45 mm bore, 70 Shore A | Assembled | Released | 8 | 70 | 29 July 2026 | Coomera Works | PL-26-2326 | |
| PL-26-2717 IF-CoC-2717 | IFC06-165-D45-70 Isoflex 6 Bolt gearbox coupling — 165 mm PCD, 45 mm bore, 70 Shore A | Assembled | Released | 3 | 70 | 29 July 2026 | Coomera Works | — | |
| PL-26-2659 IF-CoC-2659 | IFV050-LMMM20-45-ZP Isoflex Light machinery mount — 50 mm, M20, 45 Shore A, zinc plated | Assembled | Released | 45 | 45 | 29 July 2026 | Coomera Works | — | |
| PL-26-2523 IF-CoC-2523 | IFV063-CYLM20-50-ZP Isoflex Cylindrical mount — 63 mm, M20, 50 Shore A, zinc plated | Assembled | Released | 27 | 50 | 29 July 2026 | Coomera Works | — | |
| PL-26-2493 IF-CoC-2493 | IFV127-DCPM20-65-SS Isoflex Dual compression mount — 127 mm, M20, 65 Shore A, 316 stainless | Assembled | Released | 7 | 65 | 29 July 2026 | Coomera Works | PL-26-2250 | |
| PL-26-2460 IF-CoC-2460 | IFV152-BDNM20-70-ZP Isoflex B Type bolt-down mount — 152 mm, M20, 70 Shore A, zinc plated | Assembled | Released | 36 | 70 | 29 July 2026 | Coomera Works | PL-26-2239 | |
| PL-26-2440 IF-CoC-2440 | IFV127-BDNM16-45-SS Isoflex B Type bolt-down mount — 127 mm, M16, 45 Shore A, 316 stainless | Assembled | Released | 13 | 45 | 29 July 2026 | Coomera Works | — | |
| PL-26-2415 IF-CoC-2415 | IFV075-BDNM16-55-SS Isoflex B Type bolt-down mount — 75 mm, M16, 55 Shore A, 316 stainless | Assembled | Released | 19 | 55 | 29 July 2026 | Coomera Works | — | |
| PL-26-2412 IF-CoC-2412 | IFV254-ASTM24-60-SS Isoflex S Type adjusting stud mount — 254 mm, M24, 60 Shore A, 316 stainless | Assembled | Released | 16 | 60 | 29 July 2026 | Coomera Works | PL-26-2228 | |
| PL-26-2259 IF-CoC-2259 | SA-V063-CYL-65 Cylindrical sub-assembly — 63 mm, 65 Shore A | Machined | Released | 19 | 65 | 29 July 2026 | Coomera Works | — | |
| PL-26-2216 IF-CoC-2216 | MLD-V127-60 Isoflex co-polymer moulding — 127 mm body, 60 Shore A | Poured | Released | 40 | 60 | 29 July 2026 | Coomera Works | — | |
| PL-26-2189 IF-CoC-2189 | MLD-C98-70 Isoflex coupling element moulding — 98 mm PCD, 70 Shore A | Poured | Released | 4 | 70 | 29 July 2026 | Coomera Works | — | |
| PL-26-2142 IF-CoC-2142 | MLD-V090-70 Isoflex co-polymer moulding — 90 mm body, 70 Shore A | Poured | Released | 23 | 70 | 29 July 2026 | Coomera Works | — | |
| PL-26-2115 IF-CoC-2115 | MLD-V050-75 Isoflex co-polymer moulding — 50 mm body, 75 Shore A | Poured | Released | 35 | 75 | 29 July 2026 | Coomera Works | — | |
| PL-26-2809 IF-CoC-2809 | CKD-V178-TRNM24-55-ZP Isoflex Trunnion mount — 178 mm, M24, 55 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 9 | 55 | 28 July 2026 | Coomera Works | PL-26-2270 | |
| PL-26-2674 IF-CoC-2674 | IFV075-LMMM20-50-ZP Isoflex Light machinery mount — 75 mm, M20, 50 Shore A, zinc plated | Assembled | Released | 41 | 50 | 28 July 2026 | Coomera Works | — | |
| PL-26-2634 IF-CoC-2634 | IFV127-GPMM16-50-ZP Isoflex General purpose mount — 127 mm, M16, 50 Shore A, zinc plated | Assembled | Released | 13 | 50 | 28 July 2026 | Coomera Works | — | |
| PL-26-2459 IF-CoC-2459 | IFV152-BDNM20-60-SS Isoflex B Type bolt-down mount — 152 mm, M20, 60 Shore A, 316 stainless | Assembled | Released | 8 | 60 | 28 July 2026 | Coomera Works | PL-26-2238 | |
| PL-26-2408 IF-CoC-2408 | IFV254-ASTM20-70-ZP Isoflex S Type adjusting stud mount — 254 mm, M20, 70 Shore A, zinc plated | Assembled | Released | 9 | 70 | 28 July 2026 | Coomera Works | PL-26-2229 | |
| PL-26-2340 IF-CoC-2340 | IFV090-ASTM16-60-ZP Isoflex S Type adjusting stud mount — 90 mm, M16, 60 Shore A, zinc plated | Assembled | Released | 10 | 60 | 28 July 2026 | Coomera Works | — | |
| PL-26-2318 IF-CoC-2318 | SA-C06-180-60 6 Bolt coupling element — 180 mm PCD, 60 Shore A | Machined | Released | 19 | 60 | 28 July 2026 | Coomera Works | — | |
| PL-26-2287 IF-CoC-2287 | SA-V063-GPM-75 General purpose sub-assembly — 63 mm, 75 Shore A | Machined | Released | 47 | 75 | 28 July 2026 | Coomera Works | PL-26-2122 | |
| PL-26-2816 IF-CoC-2816 | CKD-V110-GPMM16-70-ZP Isoflex General purpose mount — 110 mm, M16, 70 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 27 | 70 | 27 July 2026 | Coomera Works | — | |
| PL-26-2618 IF-CoC-2618 | IFV090-GPMM16-55-SS Isoflex General purpose mount — 90 mm, M16, 55 Shore A, 316 stainless | Assembled | Released | 16 | 55 | 27 July 2026 | Coomera Works | — | |
| PL-26-2536 IF-CoC-2536 | IFV090-CYLM20-55-SS Isoflex Cylindrical mount — 90 mm, M20, 55 Shore A, 316 stainless | Assembled | Released | 12 | 55 | 27 July 2026 | Coomera Works | — | |
| PL-26-2514 IF-CoC-2514 | IFV203-DCPM24-55-ZP Isoflex Dual compression mount — 203 mm, M24, 55 Shore A, zinc plated | Assembled | Released | 5 | 55 | 27 July 2026 | Coomera Works | — | |
| PL-26-2435 IF-CoC-2435 | IFV090-BDNM24-75-ZP Isoflex B Type bolt-down mount — 90 mm, M24, 75 Shore A, zinc plated | Assembled | Released | 42 | 75 | 27 July 2026 | Coomera Works | — | |
| PL-26-2414 IF-CoC-2414 | IFV254-ASTM30-50-SS Isoflex S Type adjusting stud mount — 254 mm, M30, 50 Shore A, 316 stainless | Assembled | Released | 7 | 50 | 27 July 2026 | Coomera Works | — | |
| PL-26-2367 IF-CoC-2367 | IFV127-ASTM20-75-ZP Isoflex S Type adjusting stud mount — 127 mm, M20, 75 Shore A, zinc plated | Assembled | Released | 7 | 75 | 27 July 2026 | Coomera Works | — | |
| PL-26-2356 IF-CoC-2356 | IFV110-ASTM20-75-ZP Isoflex S Type adjusting stud mount — 110 mm, M20, 75 Shore A, zinc plated | Assembled | Released | 24 | 75 | 27 July 2026 | Coomera Works | — | |
| PL-26-2280 IF-CoC-2280 | SA-V075-HNG-50 Hanger sub-assembly — 75 mm, 50 Shore A | Machined | Released | 33 | 50 | 27 July 2026 | Coomera Works | PL-26-2126 | |
| PL-26-2110 IF-CoC-2110 | MLD-V050-65 Isoflex co-polymer moulding — 50 mm body, 65 Shore A | Poured | Released | 33 | 65 | 27 July 2026 | Coomera Works | — | |
| PL-26-2823 IF-CoC-2823 | CKD-V127-GPMM20-65-ZP Isoflex General purpose mount — 127 mm, M20, 65 Shore A, zinc plated — complete knock-down kit | Assembled | Released | 26 | 65 | 26 July 2026 | Coomera Works | — | |
| PL-26-2569 IF-CoC-2569 | IFV254-TRNM30-70-SS Isoflex Trunnion mount — 254 mm, M30, 70 Shore A, 316 stainless | Assembled | Released | 6 | 70 | 26 July 2026 | Coomera Works | — | |
| PL-26-2424 IF-CoC-2424 | IFV090-BDNM16-75-SS Isoflex B Type bolt-down mount — 90 mm, M16, 75 Shore A, 316 stainless | Assembled | Released | 7 | 75 | 26 July 2026 | Coomera Works | — | |
| PL-26-2405 IF-CoC-2405 | IFV203-ASTM30-55-ZP Isoflex S Type adjusting stud mount — 203 mm, M30, 55 Shore A, zinc plated | Assembled | Released | 11 | 55 | 26 July 2026 | Coomera Works | — | |
| PL-26-2359 IF-CoC-2359 | IFV110-ASTM24-60-SS Isoflex S Type adjusting stud mount — 110 mm, M24, 60 Shore A, 316 stainless | Assembled | Released | 16 | 60 | 26 July 2026 | Coomera Works | — |
No lots match that.