IFV063-CYLM20-45-ZP

Finished DNV type approved

Isoflex Cylindrical mount — 63 mm, M20, 45 Shore A, zinc plated

What is behind this part number

Free stock at each stage, and the work between them. All three are stocked and all three are sellable.

24 s each

1.5 min each

Can ship today

on the shelf, plus what is a few minutes away

0 finished and unpromised, and another 46 could be finished today out of what is already on the shelf — about 1 h 19 min of work. A stock report that only counts the first number is 46 pieces wrong.

Stock

0 on hand across 1 locations

Location	Bin	On hand	Firm	Free
Coomera Works	FIN	0	0	0

Built from

1.5 min each on Assembly bench 1. Every one of these is a part number Isoflex also sell on its own.

Part number	Stage	Per unit	Free now	Covers
SA-V063-CYL-45 Cylindrical sub-assembly — 63 mm, 45 Shore A	Sub-assembly	1	20	20
HW-AST-M20-120-ZP Adjusting stud M20 × 120 mm — zinc plated	Bought-in	1	99	99
HW-TPL-063-ZP Top plate — 63 mm mount, zinc plated	Bought-in	1	46	46
HW-LKN-M20-ZP Locknut M20 — zinc plated	Bought-in	2	607	303

On open orders

0 firm · 0 soft

Not on any open order.

Stock movements

When	Kind	Reference	Lot	Qty
No movements yet.

Detail

Family: Engine Mounts
Category: Cylindrical
Stage: Finished
Source: Make
List price: $217.38
Cost: $115.21
Margin: 47.0%
Reorder point: 12 · order 24
Work: 1.5 min each on Assembly bench 1
Durometer: 45 Shore A
Rated load: 327 kg
Thread: M20
Bolt PCD: —
Lead time: 2 days
Supplier: —
Supplier part: —
HS code: 8487.90.00

At least 85% vibration isolation at worst-case engine idle. Stable co-polymer — no rubber content, resists fuels, oils and water. Rated 327 kg static.

Lots

No lots yet.