IFV075-CYLM20-45-SS
FinishedIsoflex Cylindrical mount — 75 mm, M20, 45 Shore A, 316 stainless
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
47
MLD-V075-45
24 s each
Sub-assembly
0
SA-V075-CYL-45
1.5 min each
Finished
12
IFV075-CYLM20-45-SS
=
Can ship today
59
on the shelf, plus what is a few minutes away
12 finished and unpromised, and another 47 could be finished today out of what is already on the shelf — about 1 h 29 min of work. A stock report that only counts the first number is 47 pieces wrong.
Stock
12 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | FIN | 12 | 0 | 12 |
Built from
1.5 min each on Assembly bench 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| SA-V075-CYL-45 Cylindrical sub-assembly — 75 mm, 45 Shore A | Sub-assembly | 1 | 0 | 0 |
| HW-AST-M20-120-SS Adjusting stud M20 × 120 mm — 316 stainless | Bought-in | 1 | 77 | 77 |
| HW-TPL-075-SS Top plate — 75 mm mount, 316 stainless | Bought-in | 1 | 69 | 69 |
| HW-LKN-M20-SS Locknut M20 — 316 stainless | Bought-in | 2 | 614 | 307 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- Cylindrical
- Stage
- Finished
- Source
- Make
- List price
- $263.96
- Cost
- $139.90
- Margin
- 47.0%
- Reorder point
- 4 · order 8
- Work
- 1.5 min each on Assembly bench 1
- Durometer
- 45 Shore A
- Rated load
- 464 kg
- Thread
- M20
- Bolt PCD
- —
- Lead time
- 2 days
- Supplier
- —
- Supplier part
- —
- HS code
- 8487.90.00
At least 85% vibration isolation at worst-case engine idle. Stable co-polymer — no rubber content, resists fuels, oils and water. Rated 464 kg static.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit IFV075-CYLM20-45-SS