IFV090-BDNM24-65-ZP

Finished DNV type approved CKD

Isoflex B Type bolt-down mount — 90 mm, M24, 65 Shore A, zinc plated

What is behind this part number

Free stock at each stage, and the work between them. All three are stocked and all three are sellable.

30 s each

1.5 min each

Can ship today

on the shelf, plus what is a few minutes away

0 finished and unpromised, and another 31 could be finished today out of what is already on the shelf — about 47 min of work. A stock report that only counts the first number is 31 pieces wrong.

Stock

0 on hand across 1 locations

Location	Bin	On hand	Firm	Free
Coomera Works	FIN	0	0	0

Built from

1.5 min each on Assembly bench 1. Every one of these is a part number Isoflex also sell on its own.

Part number	Stage	Per unit	Free now	Covers
SA-V090-BDN-65 B Type bolt-down sub-assembly — 90 mm, 65 Shore A	Sub-assembly	1	31	31
HW-AST-M24-160-ZP Adjusting stud M24 × 160 mm — zinc plated	Bought-in	1	133	133
HW-TPL-090-ZP Top plate — 90 mm mount, zinc plated	Bought-in	1	80	80
HW-LKN-M24-ZP Locknut M24 — zinc plated	Bought-in	2	210	105

On open orders

0 firm · 0 soft

Not on any open order.

Stock movements

When	Kind	Reference	Lot	Qty
No movements yet.

Detail

Family: Engine Mounts
Category: B Type bolt-down
Stage: Finished
Source: Make
List price: $286.60
Cost: $151.90
Margin: 47.0%
Reorder point: 12 · order 24
Work: 1.5 min each on Assembly bench 1
Durometer: 65 Shore A
Rated load: 965 kg
Thread: M24
Bolt PCD: —
Lead time: 2 days
Supplier: —
Supplier part: —
HS code: 8487.90.00

At least 85% vibration isolation at worst-case engine idle. Stable co-polymer — no rubber content, resists fuels, oils and water. Rated 965 kg static.

Lots

No lots yet.