IFV090-HNGM20-50-ZP
Finished DNV type approvedIsoflex Hanger mount — 90 mm, M20, 50 Shore A, zinc plated
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
52
MLD-V090-50
36 s each
Sub-assembly
16
SA-V090-HNG-50
1.5 min each
Finished
12
IFV090-HNGM20-50-ZP
=
Can ship today
80
on the shelf, plus what is a few minutes away
12 finished and unpromised, and another 68 could be finished today out of what is already on the shelf — about 2 h 13 min of work. A stock report that only counts the first number is 68 pieces wrong.
Stock
12 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | FIN | 12 | 0 | 12 |
Built from
1.5 min each on Assembly bench 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| SA-V090-HNG-50 Hanger sub-assembly — 90 mm, 50 Shore A | Sub-assembly | 1 | 16 | 16 |
| HW-AST-M20-160-ZP Adjusting stud M20 × 160 mm — zinc plated | Bought-in | 1 | 139 | 139 |
| HW-TPL-090-ZP Top plate — 90 mm mount, zinc plated | Bought-in | 1 | 80 | 80 |
| HW-LKN-M20-ZP Locknut M20 — zinc plated | Bought-in | 2 | 607 | 303 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- Hanger
- Stage
- Finished
- Source
- Make
- List price
- $274.42
- Cost
- $145.44
- Margin
- 47.0%
- Reorder point
- 12 · order 24
- Work
- 1.5 min each on Assembly bench 1
- Durometer
- 50 Shore A
- Rated load
- 743 kg
- Thread
- M20
- Bolt PCD
- —
- Lead time
- 2 days
- Supplier
- —
- Supplier part
- —
- HS code
- 8487.90.00
At least 85% vibration isolation at worst-case engine idle. Stable co-polymer — no rubber content, resists fuels, oils and water. Rated 743 kg static.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit IFV090-HNGM20-50-ZP