IFV110-GPMM24-65-ZP
Finished CKDIsoflex General purpose mount — 110 mm, M24, 65 Shore A, zinc plated
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
45
MLD-V110-65
30 s each
Sub-assembly
57
SA-V110-GPM-65
1.5 min each
Finished
46
IFV110-GPMM24-65-ZP
=
Can ship today
133
on the shelf, plus what is a few minutes away
46 finished and unpromised, and another 87 could be finished today out of what is already on the shelf — about 2 h 26 min of work. A stock report that only counts the first number is 87 pieces wrong.
Stock
46 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | FIN | 46 | 0 | 46 |
Built from
1.5 min each on Assembly bench 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| SA-V110-GPM-65 General purpose sub-assembly — 110 mm, 65 Shore A | Sub-assembly | 1 | 57 | 57 |
| HW-AST-M24-160-ZP Adjusting stud M24 × 160 mm — zinc plated | Bought-in | 1 | 133 | 133 |
| HW-TPL-110-ZP Top plate — 110 mm mount, zinc plated | Bought-in | 1 | 87 | 87 |
| HW-LKN-M24-ZP Locknut M24 — zinc plated | Bought-in | 2 | 210 | 105 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Machinery Mounts
- Category
- General purpose
- Stage
- Finished
- Source
- Make
- List price
- $324.58
- Cost
- $172.03
- Margin
- 47.0%
- Reorder point
- 12 · order 24
- Work
- 1.5 min each on Assembly bench 1
- Durometer
- 65 Shore A
- Rated load
- 1,442 kg
- Thread
- M24
- Bolt PCD
- —
- Lead time
- 2 days
- Supplier
- —
- Supplier part
- —
- HS code
- 8487.90.00
At least 85% vibration isolation at worst-case engine idle. Stable co-polymer — no rubber content, resists fuels, oils and water. Rated 1442 kg static.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit IFV110-GPMM24-65-ZP