SA-C06-152-60
Sub-assembly6 Bolt coupling element — 152 mm PCD, 60 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
5
MLD-C152-60
1.6 min each
Sub-assembly
28
SA-C06-152-60
=
Can ship today
33
on the shelf, plus what is a few minutes away
28 finished and unpromised, and another 5 could be finished today out of what is already on the shelf — about 8 min of work. A stock report that only counts the first number is 5 pieces wrong.
Stock
28 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 28 | 0 | 28 |
Built from
1.6 min each on CNC 2. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-C152-60 Isoflex coupling element moulding — 152 mm PCD, 60 Shore A | Moulding | 1 | 5 | 5 |
Used in
The other half of the story — this part number is also consumed into 4 others.
| Part number | Stage | Uses |
|---|---|---|
| IFC06-152-D40-60 Isoflex 6 Bolt gearbox coupling — 152 mm PCD, 40 mm bore, 60 Shore A | Finished | 1 |
| IFC06-152-D45-60 Isoflex 6 Bolt gearbox coupling — 152 mm PCD, 45 mm bore, 60 Shore A | Finished | 1 |
| IFC06-152-D50-60 Isoflex 6 Bolt gearbox coupling — 152 mm PCD, 50 mm bore, 60 Shore A | Finished | 1 |
| IFC06-152-D55-60 Isoflex 6 Bolt gearbox coupling — 152 mm PCD, 55 mm bore, 60 Shore A | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Gearbox Couplings
- Category
- 6 Bolt — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $235.17
- Cost
- $129.34
- Margin
- 45.0%
- Reorder point
- 10 · order 20
- Work
- 1.6 min each on CNC 2
- Durometer
- 60 Shore A
- Rated load
- —
- Thread
- —
- Bolt PCD
- 152 mm
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 8483.60.00
Machined and drilled 6 bolt element for a 152 mm PCD output flange.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-C06-152-60