SA-CSP-165-80
Sub-assemblySpicer / Uni-Joint coupling element — 165 mm PCD, 80 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
29
MLD-C165-80
1.8 min each
Sub-assembly
11
SA-CSP-165-80
=
Can ship today
40
on the shelf, plus what is a few minutes away
11 finished and unpromised, and another 29 could be finished today out of what is already on the shelf — about 52 min of work. A stock report that only counts the first number is 29 pieces wrong.
Stock
11 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 11 | 0 | 11 |
Built from
1.8 min each on CNC 2. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-C165-80 Isoflex coupling element moulding — 165 mm PCD, 80 Shore A | Moulding | 1 | 29 | 29 |
Used in
The other half of the story — this part number is also consumed into 3 others.
| Part number | Stage | Uses |
|---|---|---|
| IFCSP-165-D35-80 Isoflex Spicer / Uni-Joint gearbox coupling — 165 mm PCD, 35 mm bore, 80 Shore A | Finished | 1 |
| IFCSP-165-D40-80 Isoflex Spicer / Uni-Joint gearbox coupling — 165 mm PCD, 40 mm bore, 80 Shore A | Finished | 1 |
| IFCSP-165-D45-80 Isoflex Spicer / Uni-Joint gearbox coupling — 165 mm PCD, 45 mm bore, 80 Shore A | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Gearbox Couplings
- Category
- Spicer / Uni-Joint — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $303.47
- Cost
- $166.91
- Margin
- 45.0%
- Reorder point
- 10 · order 20
- Work
- 1.8 min each on CNC 2
- Durometer
- 80 Shore A
- Rated load
- —
- Thread
- —
- Bolt PCD
- 165 mm
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 8483.60.00
Machined and drilled 4 bolt element for a 165 mm PCD output flange.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-CSP-165-80