SA-V075-GPM-55
Sub-assemblyGeneral purpose sub-assembly — 75 mm, 55 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
59
MLD-V075-55
30 s each
Sub-assembly
19
SA-V075-GPM-55
=
Can ship today
78
on the shelf, plus what is a few minutes away
19 finished and unpromised, and another 59 could be finished today out of what is already on the shelf — about 30 min of work. A stock report that only counts the first number is 59 pieces wrong.
Stock
19 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 19 | 0 | 19 |
Built from
30 s each on CNC 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V075-55 Isoflex co-polymer moulding — 75 mm body, 55 Shore A | Moulding | 1 | 59 | 59 |
Used in
The other half of the story — this part number is also consumed into 6 others.
| Part number | Stage | Uses |
|---|---|---|
| IFV075-GPMM16-55-SS Isoflex General purpose mount — 75 mm, M16, 55 Shore A, 316 stainless | Finished | 1 |
| IFV075-GPMM16-55-ZP Isoflex General purpose mount — 75 mm, M16, 55 Shore A, zinc plated | Finished | 1 |
| IFV075-GPMM20-55-SS Isoflex General purpose mount — 75 mm, M20, 55 Shore A, 316 stainless | Finished | 1 |
| IFV075-GPMM20-55-ZP Isoflex General purpose mount — 75 mm, M20, 55 Shore A, zinc plated | Finished | 1 |
| IFV075-GPMM24-55-SS Isoflex General purpose mount — 75 mm, M24, 55 Shore A, 316 stainless | Finished | 1 |
| IFV075-GPMM24-55-ZP Isoflex General purpose mount — 75 mm, M24, 55 Shore A, zinc plated | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| 05 Aug 2026, 1:20 am | Works receipt | WO-26-0154 | — | +27 |
Detail
- Family
- Machinery Mounts
- Category
- General purpose — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $137.14
- Cost
- $75.43
- Margin
- 45.0%
- Reorder point
- 16 · order 30
- Work
- 30 s each on CNC 1
- Durometer
- 55 Shore A
- Rated load
- 567 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined general purpose body. 30 seconds on CNC 1 from MLD-V075-55.
Lots
0No lots yet.
Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V075-GPM-55