SA-V110-CYL-65
Sub-assemblyCylindrical sub-assembly — 110 mm, 65 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
45
MLD-V110-65
24 s each
Sub-assembly
0
SA-V110-CYL-65
=
Can ship today
45
on the shelf, plus what is a few minutes away
0 finished and unpromised, and another 45 could be finished today out of what is already on the shelf — about 18 min of work. A stock report that only counts the first number is 45 pieces wrong.
Stock
0 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 0 | 0 | 0 |
Built from
24 s each on CNC 2. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V110-65 Isoflex co-polymer moulding — 110 mm body, 65 Shore A | Moulding | 1 | 45 | 45 |
Used in
The other half of the story — this part number is also consumed into 6 others.
| Part number | Stage | Uses |
|---|---|---|
| CKD-V110-CYLM16-65-ZP Isoflex Cylindrical mount — 110 mm, M16, 65 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| CKD-V110-CYLM20-65-ZP Isoflex Cylindrical mount — 110 mm, M20, 65 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| IFV110-CYLM16-65-SS Isoflex Cylindrical mount — 110 mm, M16, 65 Shore A, 316 stainless | Finished | 1 |
| IFV110-CYLM16-65-ZP Isoflex Cylindrical mount — 110 mm, M16, 65 Shore A, zinc plated | Finished | 1 |
| IFV110-CYLM20-65-SS Isoflex Cylindrical mount — 110 mm, M20, 65 Shore A, 316 stainless | Finished | 1 |
| IFV110-CYLM20-65-ZP Isoflex Cylindrical mount — 110 mm, M20, 65 Shore A, zinc plated | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- Cylindrical — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $185.58
- Cost
- $102.07
- Margin
- 45.0%
- Reorder point
- 16 · order 30
- Work
- 24 s each on CNC 2
- Durometer
- 65 Shore A
- Rated load
- 1,442 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined cylindrical body. 24 seconds on CNC 2 from MLD-V110-65.
Lots
0No lots yet.
Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V110-CYL-65