SA-V110-GPM-70
Sub-assemblyGeneral purpose sub-assembly — 110 mm, 70 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
67
MLD-V110-70
30 s each
Sub-assembly
0
SA-V110-GPM-70
=
Can ship today
67
on the shelf, plus what is a few minutes away
0 finished and unpromised, and another 67 could be finished today out of what is already on the shelf — about 34 min of work. A stock report that only counts the first number is 67 pieces wrong.
Stock
0 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 0 | 0 | 0 |
Built from
30 s each on CNC 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V110-70 Isoflex co-polymer moulding — 110 mm body, 70 Shore A | Moulding | 1 | 67 | 67 |
Used in
The other half of the story — this part number is also consumed into 9 others.
| Part number | Stage | Uses |
|---|---|---|
| CKD-V110-GPMM16-70-ZP Isoflex General purpose mount — 110 mm, M16, 70 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| CKD-V110-GPMM20-70-ZP Isoflex General purpose mount — 110 mm, M20, 70 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| CKD-V110-GPMM24-70-ZP Isoflex General purpose mount — 110 mm, M24, 70 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| IFV110-GPMM16-70-SS Isoflex General purpose mount — 110 mm, M16, 70 Shore A, 316 stainless | Finished | 1 |
| IFV110-GPMM16-70-ZP Isoflex General purpose mount — 110 mm, M16, 70 Shore A, zinc plated | Finished | 1 |
| IFV110-GPMM20-70-SS Isoflex General purpose mount — 110 mm, M20, 70 Shore A, 316 stainless | Finished | 1 |
| IFV110-GPMM20-70-ZP Isoflex General purpose mount — 110 mm, M20, 70 Shore A, zinc plated | Finished | 1 |
| IFV110-GPMM24-70-SS Isoflex General purpose mount — 110 mm, M24, 70 Shore A, 316 stainless | Finished | 1 |
| IFV110-GPMM24-70-ZP Isoflex General purpose mount — 110 mm, M24, 70 Shore A, zinc plated | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Machinery Mounts
- Category
- General purpose — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $187.69
- Cost
- $103.23
- Margin
- 45.0%
- Reorder point
- 16 · order 30
- Work
- 30 s each on CNC 1
- Durometer
- 70 Shore A
- Rated load
- 1,553 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined general purpose body. 30 seconds on CNC 1 from MLD-V110-70.
Lots
0No lots yet.
Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V110-GPM-70