SA-V178-DCP-70
Sub-assemblyDual compression sub-assembly — 178 mm, 70 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
26
MLD-V178-70
48 s each
Sub-assembly
0
SA-V178-DCP-70
=
Can ship today
26
on the shelf, plus what is a few minutes away
0 finished and unpromised, and another 26 could be finished today out of what is already on the shelf — about 21 min of work. A stock report that only counts the first number is 26 pieces wrong.
Stock
0 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 0 | 0 | 0 |
Built from
48 s each on CNC 2. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V178-70 Isoflex co-polymer moulding — 178 mm body, 70 Shore A | Moulding | 1 | 26 | 26 |
Used in
The other half of the story — this part number is also consumed into 9 others.
| Part number | Stage | Uses |
|---|---|---|
| CKD-V178-DCPM20-70-ZP Isoflex Dual compression mount — 178 mm, M20, 70 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| CKD-V178-DCPM24-70-ZP Isoflex Dual compression mount — 178 mm, M24, 70 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| CKD-V178-DCPM30-70-ZP Isoflex Dual compression mount — 178 mm, M30, 70 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| IFV178-DCPM20-70-SS Isoflex Dual compression mount — 178 mm, M20, 70 Shore A, 316 stainless | Finished | 1 |
| IFV178-DCPM20-70-ZP Isoflex Dual compression mount — 178 mm, M20, 70 Shore A, zinc plated | Finished | 1 |
| IFV178-DCPM24-70-SS Isoflex Dual compression mount — 178 mm, M24, 70 Shore A, 316 stainless | Finished | 1 |
| IFV178-DCPM24-70-ZP Isoflex Dual compression mount — 178 mm, M24, 70 Shore A, zinc plated | Finished | 1 |
| IFV178-DCPM30-70-SS Isoflex Dual compression mount — 178 mm, M30, 70 Shore A, 316 stainless | Finished | 1 |
| IFV178-DCPM30-70-ZP Isoflex Dual compression mount — 178 mm, M30, 70 Shore A, zinc plated | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- Dual compression — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $273.61
- Cost
- $150.49
- Margin
- 45.0%
- Reorder point
- 6 · order 12
- Work
- 48 s each on CNC 2
- Durometer
- 70 Shore A
- Rated load
- 4,066 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined dual compression body. 48 seconds on CNC 2 from MLD-V178-70.
Lots
0No lots yet.
Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V178-DCP-70