SA-V254-AST-45
Sub-assemblyS Type adjusting stud sub-assembly — 254 mm, 45 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
13
MLD-V254-45
30 s each
Sub-assembly
10
SA-V254-AST-45
=
Can ship today
23
on the shelf, plus what is a few minutes away
10 finished and unpromised, and another 13 could be finished today out of what is already on the shelf — about 7 min of work. A stock report that only counts the first number is 13 pieces wrong.
Stock
10 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 10 | 0 | 10 |
Built from
30 s each on CNC 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V254-45 Isoflex co-polymer moulding — 254 mm body, 45 Shore A | Moulding | 1 | 13 | 13 |
Used in
The other half of the story — this part number is also consumed into 6 others.
| Part number | Stage | Uses |
|---|---|---|
| IFV254-ASTM20-45-SS Isoflex S Type adjusting stud mount — 254 mm, M20, 45 Shore A, 316 stainless | Finished | 1 |
| IFV254-ASTM20-45-ZP Isoflex S Type adjusting stud mount — 254 mm, M20, 45 Shore A, zinc plated | Finished | 1 |
| IFV254-ASTM24-45-SS Isoflex S Type adjusting stud mount — 254 mm, M24, 45 Shore A, 316 stainless | Finished | 1 |
| IFV254-ASTM24-45-ZP Isoflex S Type adjusting stud mount — 254 mm, M24, 45 Shore A, zinc plated | Finished | 1 |
| IFV254-ASTM30-45-SS Isoflex S Type adjusting stud mount — 254 mm, M30, 45 Shore A, 316 stainless | Finished | 1 |
| IFV254-ASTM30-45-ZP Isoflex S Type adjusting stud mount — 254 mm, M30, 45 Shore A, zinc plated | Finished | 1 |
On open orders
0 firm · 0 softNot on any open order.
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- S Type adjusting stud — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $359.11
- Cost
- $197.51
- Margin
- 45.0%
- Reorder point
- 6 · order 12
- Work
- 30 s each on CNC 1
- Durometer
- 45 Shore A
- Rated load
- 5,323 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined s type adjusting stud body. 30 seconds on CNC 1 from MLD-V254-45.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V254-AST-45