SA-CSP-114-70
Sub-assemblySpicer / Uni-Joint coupling element — 114 mm PCD, 70 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
38
MLD-C114-70
1.8 min each
Sub-assembly
27
SA-CSP-114-70
=
Can ship today
65
on the shelf, plus what is a few minutes away
27 finished and unpromised, and another 38 could be finished today out of what is already on the shelf — about 1 h 8 min of work. A stock report that only counts the first number is 38 pieces wrong.
Stock
27 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 27 | 0 | 27 |
Built from
1.8 min each on CNC 2. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-C114-70 Isoflex coupling element moulding — 114 mm PCD, 70 Shore A | Moulding | 1 | 38 | 38 |
Used in
The other half of the story — this part number is also consumed into 3 others.
| Part number | Stage | Uses |
|---|---|---|
| IFCSP-114-D35-70 Isoflex Spicer / Uni-Joint gearbox coupling — 114 mm PCD, 35 mm bore, 70 Shore A | Finished | 1 |
| IFCSP-114-D40-70 Isoflex Spicer / Uni-Joint gearbox coupling — 114 mm PCD, 40 mm bore, 70 Shore A | Finished | 1 |
| IFCSP-114-D45-70 Isoflex Spicer / Uni-Joint gearbox coupling — 114 mm PCD, 45 mm bore, 70 Shore A | Finished | 1 |
On open orders
0 firm · 17 soft| Order | Customer | Qty | Allocated | Reservation | Wanted |
|---|---|---|---|---|---|
| SO-26-0603 | SOC | 17 | 0 | Soft | 30 Nov 2026 |
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Gearbox Couplings
- Category
- Spicer / Uni-Joint — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $226.55
- Cost
- $124.60
- Margin
- 45.0%
- Reorder point
- 10 · order 20
- Work
- 1.8 min each on CNC 2
- Durometer
- 70 Shore A
- Rated load
- —
- Thread
- —
- Bolt PCD
- 114 mm
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 8483.60.00
Machined and drilled 4 bolt element for a 114 mm PCD output flange.
Lots
1Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-CSP-114-70