SA-V090-AST-50
Sub-assemblyS Type adjusting stud sub-assembly — 90 mm, 50 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
52
MLD-V090-50
30 s each
Sub-assembly
0
SA-V090-AST-50
=
Can ship today
52
on the shelf, plus what is a few minutes away
0 finished and unpromised, and another 52 could be finished today out of what is already on the shelf — about 26 min of work. A stock report that only counts the first number is 52 pieces wrong.
Stock
0 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 0 | 0 | 0 |
Built from
30 s each on CNC 1. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V090-50 Isoflex co-polymer moulding — 90 mm body, 50 Shore A | Moulding | 1 | 52 | 52 |
Used in
The other half of the story — this part number is also consumed into 8 others.
| Part number | Stage | Uses |
|---|---|---|
| IFV090-ASTM16-50-SS Isoflex S Type adjusting stud mount — 90 mm, M16, 50 Shore A, 316 stainless | Finished | 1 |
| IFV090-ASTM16-50-ZP Isoflex S Type adjusting stud mount — 90 mm, M16, 50 Shore A, zinc plated | Finished | 1 |
| IFV090-ASTM20-50-SS Isoflex S Type adjusting stud mount — 90 mm, M20, 50 Shore A, 316 stainless | Finished | 1 |
| IFV090-ASTM20-50-ZP Isoflex S Type adjusting stud mount — 90 mm, M20, 50 Shore A, zinc plated | Finished | 1 |
| IFV090-ASTM24-50-SS Isoflex S Type adjusting stud mount — 90 mm, M24, 50 Shore A, 316 stainless | Finished | 1 |
| IFV090-ASTM24-50-ZP Isoflex S Type adjusting stud mount — 90 mm, M24, 50 Shore A, zinc plated | Finished | 1 |
| IFV090-ASTM30-50-SS Isoflex S Type adjusting stud mount — 90 mm, M30, 50 Shore A, 316 stainless | Finished | 1 |
| IFV090-ASTM30-50-ZP Isoflex S Type adjusting stud mount — 90 mm, M30, 50 Shore A, zinc plated | Finished | 1 |
On open orders
0 firm · 14 soft| Order | Customer | Qty | Allocated | Reservation | Wanted |
|---|---|---|---|---|---|
| SO-26-0599 | SPW | 14 | 0 | Soft | 20 Nov 2026 |
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- S Type adjusting stud — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $153.99
- Cost
- $84.69
- Margin
- 45.0%
- Reorder point
- 16 · order 30
- Work
- 30 s each on CNC 1
- Durometer
- 50 Shore A
- Rated load
- 743 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined s type adjusting stud body. 30 seconds on CNC 1 from MLD-V090-50.
Lots
0No lots yet.
Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V090-AST-50