SA-V178-TRN-60
Sub-assemblyTrunnion sub-assembly — 178 mm, 60 Shore A
What is behind this part number
Free stock at each stage, and the work between them. All three are stocked and all three are sellable.
Moulding
12
MLD-V178-60
1.1 min each
Sub-assembly
0
SA-V178-TRN-60
=
Can ship today
12
on the shelf, plus what is a few minutes away
0 finished and unpromised, and another 12 could be finished today out of what is already on the shelf — about 13 min of work. A stock report that only counts the first number is 12 pieces wrong.
Stock
0 on hand across 1 locations| Location | Bin | On hand | Firm | Free |
|---|---|---|---|---|
| Coomera Works | SUB | 0 | 0 | 0 |
Built from
1.1 min each on CNC 2. Every one of these is a part number Isoflex also sell on its own.
| Part number | Stage | Per unit | Free now | Covers |
|---|---|---|---|---|
| MLD-V178-60 Isoflex co-polymer moulding — 178 mm body, 60 Shore A | Moulding | 1 | 12 | 12 |
Used in
The other half of the story — this part number is also consumed into 6 others.
| Part number | Stage | Uses |
|---|---|---|
| CKD-V178-TRNM24-60-ZP Isoflex Trunnion mount — 178 mm, M24, 60 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| CKD-V178-TRNM30-60-ZP Isoflex Trunnion mount — 178 mm, M30, 60 Shore A, zinc plated — complete knock-down kit | Finished | 1 |
| IFV178-TRNM24-60-SS Isoflex Trunnion mount — 178 mm, M24, 60 Shore A, 316 stainless | Finished | 1 |
| IFV178-TRNM24-60-ZP Isoflex Trunnion mount — 178 mm, M24, 60 Shore A, zinc plated | Finished | 1 |
| IFV178-TRNM30-60-SS Isoflex Trunnion mount — 178 mm, M30, 60 Shore A, 316 stainless | Finished | 1 |
| IFV178-TRNM30-60-ZP Isoflex Trunnion mount — 178 mm, M30, 60 Shore A, zinc plated | Finished | 1 |
On open orders
5 firm · 0 soft| Order | Customer | Qty | Allocated | Reservation | Wanted |
|---|---|---|---|---|---|
| SO-26-0597 | BSD | 5 | 0 | Firm | 17 Aug 2026 |
Stock movements
| When | Kind | Reference | Lot | Qty |
|---|---|---|---|---|
| No movements yet. | ||||
Detail
- Family
- Engine Mounts
- Category
- Trunnion — sub-assembly
- Stage
- Sub-assembly
- Source
- Make
- List price
- $269.40
- Cost
- $148.17
- Margin
- 45.0%
- Reorder point
- 6 · order 12
- Work
- 1.1 min each on CNC 2
- Durometer
- 60 Shore A
- Rated load
- 3,485 kg
- Thread
- —
- Bolt PCD
- —
- Lead time
- 1 days
- Supplier
- —
- Supplier part
- —
- HS code
- 3926.90.90
Machined trunnion body. 66 seconds on CNC 2 from MLD-V178-60.
Lots
0No lots yet.
Make them now
Raises the works orders and runs them, however far down the build list it has to reach.
Adjust stock
Writes a movement so the ledger and the on-hand figure cannot drift apart.
Edit SA-V178-TRN-60